No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FIB_1.3.6.1.4.1.2011.5.25.129.2.9.2 hwFIBOverloadSusResume

FIB_1.3.6.1.4.1.2011.5.25.129.2.9.2 hwFIBOverloadSusResume

Description

FIB/1/RECOVEROVLDSUSPEND: OID [oid] The interface board changes from the overload suspension state to the normal state. (EntityPhysicalIndex=[INTEGER], HwBaseTrapSeverity=[INTEGER], HwBaseTrapProbableCause=[INTEGER], HwBaseTrapEventType=[INTEGER], HwFibOverloadModule=[INTEGER], entPhysicalName=[STRING])

The alarm was generated when the interface board was recovered from the overload suspension status.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.129.2.9.2

Critical

equipmentAlarm(5)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

EntityPhysicalIndex

Indicates the index of the entity.

HwBaseTrapSeverity

Indicates the alarm severity.

HwBaseTrapProbableCause

Indicates possible causes.

HwBaseTrapEventType

Indicates the alarm type.

HwFibOverloadModule

Indicates overloaded modules:
  • 1: IPv4 module
  • 2: IPv6 module

entPhysicalName

Indicates the name of the entity.

Impact on the System

The interface board was recovered from the overload suspension status.

Possible Causes

When the interface board was in overload suspension status, the command to recover the interface board from the overload suspension state was configured.

Procedure

  1. Collect alarm information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 81332

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next