No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TUNNEL_1.3.6.1.4.1.2011.5.12.7.1.4.10 hwMplsApsDegradedRecovery

TUNNEL_1.3.6.1.4.1.2011.5.12.7.1.4.10 hwMplsApsDegradedRecovery

Description

TUNNEL/2/MPLS_APS_DEGRADED_RECOVER: OID [oid] The APS degraded alarm received by the tunnel protection group is cleared.(IfIndex=[INTEGER], SessionTunnelId=[integer], LocalLspId=[integer], IngressLsrId=[integer], EgressLsrId=[integer], WorkTunnel=[OCTET], SignalingProtocol=[integer])

The faulty working or protection tunnel in an APS protection group recovered.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.12.7.1.4.10 Major qualityOfServiceAlarm(3)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

IfIndex

Index of the working tunnel

SessionTunnelId

Tunnel ID

LocalLspId

LSP ID

IngressLsrId

LSR ID of the ingress

EgressLsrId

LSR ID of the egress

WorkTunnel

Name of the working tunnel in a protection group

SignalingProtocol

Signaling protocol used by a tunnel

Impact on the System

None

Possible Causes

All tunnels in the APS protection group are Up.

Procedure

  1. This alarm message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 75464

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next