No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PKI_1.3.6.1.4.1.2011.6.122.34.0.2.6 hwPKIGetCertFailHttp

PKI_1.3.6.1.4.1.2011.6.122.34.0.2.6 hwPKIGetCertFailHttp

Description

PKI/4/PKIGETCERTFAILHTTP: OID [oid] get certificate unsuccessfully with HTTP. (CertUrl=[certurl], CertSaveName=[certsavename])

The system failed to obtain the certificate through HTTP.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.122.34.0.2.6 Warning communicationsAlarm

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
certurl Indicates the URL for obtaining the certificate.
certsavename Indicates the name of the saved certificate file.

Impact on the System

The service becomes invalid after the certificate expires.

Possible Causes

  • There is no reachable route between the device and HTTP server.
  • The PKI configurations of the device and HTTP server are incorrect.
  • The HTTP server is faulty.

Procedure

  1. Run the ping command to check whether there is a reachable route between the device and HTTP server.

    If not, check the route and link to ensure that there is a reachable route between the device and HTTP server.

  2. Check whether the PKI configurations of the device and HTTP server are correct, including the certificate URL.

    If not, ensure that the PKI configurations are correct.

  3. Check whether the HTTP server is working properly.

    If not, ensure that the HTTP server is working properly.

  4. Collect alarm and configuration information, and contact technical support personnel.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 70076

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next