No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V_1.3.6.1.4.1.2011.5.25.119.1.2.2 hwVplsVcUp

L2V_1.3.6.1.4.1.2011.5.25.119.1.2.2 hwVplsVcUp

Description

L2V/2/VPLSVC_UP_ME_T:OID [oid] The status of the VPLS VC turned UP. (VsiName=[STRING], PwId=[GAUGE], RemoteIp=[IPADDR], PwType=[INTEGER], HWL2VpnStateChangeReason=[INTEGER], SysUpTime=[TIMETICK], TunnelPolicyName=[STRING])

The VPLS VC changed from Down to Up.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.119.1.2.2

Major

other(1)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

VsiName

Indicates the name of a VSI.

PwId

Indicates the ID of a PW.

RemoteIp

Indicates the IP address of the remote peer.

PwType

Indicates the type of a PW:
  • 1: normal
  • 2: other

HWL2VpnStateChangeReason

Indicates the cause of the VC status change. For details, refer to hwVplsStateChangeReason in the appendix of HUAWEI-VPLS-EXT-MIB.

SysUpTime

Indicates the time for system startup.

TunnelPolicyName

Indicates the name of a tunnel policy.

Impact on the System

Services will be recovered.

Possible Causes

The VPLS VC changed from Down to Up.

Procedure

  1. This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 81695

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next