No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RM_1.3.6.1.4.1.2011.5.25.145.6.1 hwTunnelGroupUp

RM_1.3.6.1.4.1.2011.5.25.145.6.1 hwTunnelGroupUp

Description

RM/2/TNLGROUP_UP:OID [oid] The status of the tunnel group changed to Up. (Destionation=[IPADDR], TunnelPolicy=[STRING])

The status of the tunnel group used by the service changed to Up.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.145.6.1

Major

qualityOfServiceAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Destionation

Destination IP address of the tunnel on which services depend.

TunnelPolicy

Tunnel policy used by services.

Impact on the System

Services are restored.

Possible Causes

1:

The link fault was rectified, and the tunnel became available.

2:

A TE, LDP, or GRE tunnel was configured, causing the tunnel to a specified destination to be unavailable.

3:

The VPN route iterated to the public tunnel was added again after being withdrawn.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 69367

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next