No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PKI_1. hwPKIUpdateLocalCertSucCmp

PKI_1. hwPKIUpdateLocalCertSucCmp


PKI/5/PKIUPDATELOCALCERTSUCCESSCMP: OID [OID] Updating the local certificate through CMPv2 succeeded. (LocalCertIssuer=[LocalCertIssuer], LocalCertSubject=[LocalCertSubject], NewLocalCertStartTime=[NewLocalCertStartTime], NewLocalCertFinishTime=[NewLocalCertFinishTime])

The local certificate was updated successfully through CMPv2.


Alarm ID Alarm Severity Alarm Type Indeterminate communicationsAlarm


Name Meaning
OID Indicates the MIB object ID of the alarm.
LocalCertIssuer Indicates the issuer of the local certificate.
LocalCertSubject Indicates the subject of the local certificate.
NewLocalCertStartTime Indicates the time when the updated local certificate starts to take effect.
NewLocalCertFinishTime Indicates the time when the updated local certificate expires.

Impact on the System

Services are not affected.

Possible Causes

After the CMPv2-based automatic certificate update function was enabled, the switch successfully updated the local certificate when the update time arrived.


  • This alarm is informational only, and no action is required.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 106778

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next