No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.21.4 hwRpsPowerOff

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.21.4 hwRpsPowerOff

Description

ENTITYTRAP/4/RPSPOWEROFF: OID [oid] RPS Power change to not supply status.(Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName="[OCTET]", EntityTrapFaultID=[INTEGER])

The RPS power supply stops providing power to the device.

NOTE:

Only the AR2201-48FE, AR2202-48FE, AR2204, AR2220E, AR2204-27GE, AR2204-27GE-P, AR2204-51GE-P, AR2204E, AR2204-51GE, AR2204E-D, AR2204-51GE-R support alarms about the RPS power supply.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.219.2.21.4

Warning equipmentAlarm (5)

Parameters

Name Meaning
OID

Indicates the MIB object ID of the alarm.

Index Indicates the entity index.
EntityPhysicalIndex Indicates the physical entity index.
PhysicalName Indicates the physical entity name.
EntityTrapFaultID Indicates the error code.

Impact on the System

None.

Possible Causes

The RPS power supply stops providing power to the device.

Procedure

  1. This alarm is informational only, and no action is required.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 80885

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next