No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPSEC_1. hwIPSecTunnelreachMax

IPSEC_1. hwIPSecTunnelreachMax


IPSEC/4/IPSECREACHMAXTUNNEL: OID [OID] Current counts of ipsec tunnel will reach max CPU limit or license limit, please check it.

The number of IPSec tunnels has reached 80% of the CPU or license limit threshold.


Alarm ID Alarm Severity Alarm Type Warning Communications alarm


Name Meaning
OID Indicates the MIB object ID of the alarm.

Impact on the System

New tunnels cannot be set up after the number of IPSec tunnels reaches the threshold.

Possible Causes

The number of IPSec tunnels has reached 80% of the CPU or license limit threshold.


  1. Expand the CPU capacity or apply for a new license.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 106335

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next