No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARP_1.3.6.1.4.1.2011.5.25.123.2.5 hwEthernetARPThresholdResumeAlarm

ARP_1.3.6.1.4.1.2011.5.25.123.2.5 hwEthernetARPThresholdResumeAlarm

Description

ARP/4/ARP_THRESHOLDRESUME_TRAP:OID [OID] The number of ARP entries was restored to the threshold. (entPhysicalIndex=[INTEGER], Slot name=[OCTET], Threshold=[COUNTER], Number of dynamic ARP entries=[COUNTER], Number of static ARP entries=[COUNTER]).

The number of ARP entries falls below the upper threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.123.2.5

Warning

qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

entPhysicalIndex

Indicates the index of the physical entity.

Slot name

Indicates the board name.

Threshold

Indicates the alarm threshold.

Number of dynamic ARP entries

Indicates the number of dynamic ARP entries.

Number of static ARP entries

Indicates the number of static ARP entries.

Impact on the System

None

Possible Causes

The number of ARP entries on the device fell below the upper threshold.

Procedure

  1. This alarm message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 80134

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next