No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionROBO 1.0.1 Preventive Maintenance Inspection Guide

This document describes how to inspect IT devices used in the FusionROBO solution, including the FusionROBO management center and remote sites.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PMI for FusionROBO Management Center

PMI for FusionROBO Management Center

About This Document

This document describes inspection items of the FusionROBO solution.

The FusionROBO solution consists of FusionROBO Manager and components in the FusionROBO cabinet. Servers, storage devices, switches, routers, firewalls, and energy infrastructure are involved in the FusionROBO solution.

This preventive maintenance inspection (PMI) scheme applies only to FusionROBO IT devices. Pay special attention to components in the FusionROBO cabinet.

Updated: 2019-04-20

Document ID: EDOC1100041549

Views: 553

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next