AR1610-X6
Overview
| Item | Details |
|---|---|
| Description | AR1610-X6, 8GE LAN, 2GE WAN(2GE Combo), 3 USB, 1*SIC, 2*HDD SLOT, 150W AC Power |
| Part Number | 02351JVS |
| Model | AR1610-X6 |
| First supported version | V300R003C00 |
| Remarks | The AR1610-X6 is supported in V300R003C00 to V300R019C10 versions. |
Appearance
Components
1. RST button NOTICE:
This button is used to reset the router.
|
2. Power button NOTE:
|
3. Two USB 3.0 interfaces (CPU) |
4. One USB 2.0 interface (BMC) |
5. One VGA interface |
6. Console interface (BMC) |
7. Console interface (CPU) |
8. Management interface (BMC) |
9. Management interface (CPU) |
10. LAN interfaces: eight GE electrical interfaces |
11. WAN interfaces: two GE combo interfaces |
12. One SIC slot |
13. Two hard disk interfaces NOTE:
SATA, SAS, and NVMe 2.5-inch hard drives are supported. The AR-HDD1TTS-D hard disk (BOM: 02311XKB) is recommended. |
14. Ground point |
15. Extension DC power socket NOTE:
This is an extension power socket reserved for future use. |
16. Jack for power cable locking strap NOTE:
Insert a power cable locking strap in this jack to secure the power cable. |
17. AC power socket |
- |
Slot Layout
| Slot Type | Slot ID | Slot Direction | Remarks |
|---|---|---|---|
| SIC slot | 1 | Transverse | - |
Ports
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| Two USB 3.0 interfaces (CPU) | USB 3.0 Type A | A USB 3.0 interface provides up to 5 Gbit/s upload and download rates.
|
|
| One USB 2.0 interface (BMC) | USB 2.0 Type A | A USB 2.0 interface provides up to 480 Mbit/s upload and download rates.
|
USB 2.0-compliant USB flash drive |
| One VGA interface | VGA connector | A video graphics array (VGA) interface provides VGA video output. | |
| Console interface (BMC) | RJ45 | The console interface can connect to an operation terminal for onsite configuration.
|
|
| Console interface (CPU) | RJ45 | The console interface can connect to an operation terminal for onsite configuration.
|
|
| Management interface (BMC) | RJ45 | A management interface (10/100 Mbit/s auto-sensing) transmits and receives debugging data at 10 Mbit/s or 100 Mbit/s.
|
|
| Management interface (CPU) | RJ45 | A management interface (10/100 Mbit/s auto-sensing) transmits and receives debugging data at 10 Mbit/s or 100 Mbit/s.
|
|
| LAN interfaces: eight GE electrical interfaces | RJ45 | The GE electrical interfaces (10/100/1000 Mbit/s auto-sensing) transmit and receive service traffic at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
NOTE:
All GE LAN interfaces can be configured as WAN interfaces. |
|
| WAN interfaces: two GE combo interfaces | GE electrical interface: RJ45 GE optical port: LC/PC |
A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.
NOTE:
A combo interface works in auto mode and automatically works as an optical or electrical interface by default. |
The following optical modules are supported: |
Indicators
PWR indicator |
SYS indicator |
iNET indicator |
EPWR indicator |
CTRL indicator |
MGMT (CPU/BMC) indicator |
GE electrical interface indicators (GE0 to GE9) |
L/A indicators(GE8 to GE9) |
Hard disk act indicator |
Hard disk error indicator |
- |
- |
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| PWR | PWR indicator | Green | Steady on | The system power supply is normal. |
| - | Off | The system power is off. | ||
| SYS | SYS indicator | Green | Slow blinking | When no USB flash drive is connected to the router, the indicator works as the SYS indicator. The system is running properly. |
| Green | Fast blinking | When no USB flash drive is connected to the router, the indicator works as the SYS indicator. The system is being powered on or restarting. |
||
| Red | Steady on | When no USB flash drive is connected to the router, the indicator works as the SYS indicator. A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. |
||
| - | Off | When no USB flash drive is connected to the router, the indicator works as the SYS indicator. The system software is not running or is resetting. |
||
| Green | Steady on | When a USB flash drive is connected to the router, the indicator works as the USB indicator. The USB-based deployment is successful. |
||
| Green | Blinking | When a USB flash drive is connected to the router, the indicator works as the USB indicator. The USB-based deployment is in progress. |
||
| Yellow | Steady on | When a USB flash drive is connected to the router, the indicator works as the USB indicator. The USB-based deployment has not started yet and the interface card is to be registered. |
||
| Red | Steady on | When a USB flash drive is connected to the router, the indicator works as the USB indicator. The USB-based deployment has failed. |
||
| Red | Fast blinking (3 s) | When a USB flash drive is connected to the router, the indicator works as the USB indicator. The USB-based deployment is starting or ending. |
||
| iNET | iNET indicator | Green | Steady on | The network service has been established. |
| - | Off | The network service is unavailable. | ||
| EPWR | EPWR indicator | Green | Steady on | An extension power supply is present. |
| - | Off | No extension power supply is connected to the router. | ||
| CTRL | CTRL indicator | Green | Steady on | The Agile Controller-Campus has managed the router. |
| - | Off | The Agile Controller-Campus does not manage the router. | ||
| - | MGMT (CPU/BMC) indicator | Green | Steady on | A link has been established on the interface. |
| Green | Off | No link is established on the interface. | ||
| Yellow | Blinking | Data is being transmitted or received on the interface. | ||
| Yellow | Off | No data is being transmitted or received on the interface. | ||
| - | GE electrical interface indicators (GE0 to GE9) | Green | Steady on | A link has been established on the corresponding interface. |
| Green | Off | No link is established on the corresponding interface. | ||
| Yellow | Blinking | Data is being transmitted or received on the corresponding interface. | ||
| Yellow | Off | No data is being transmitted or received on the corresponding interface. | ||
| L/A | L/A indicator (GE8 to GE9) | Green | Steady on | A link has been established on the corresponding GE optical interface. |
| Green | Blinking | Data is being transmitted or received on the corresponding GE optical interface. | ||
| - | Off | The corresponding GE optical interface is not connected. | ||
| - | Hard disk ACT indicator | Green | Steady on | A hard disk is present. |
| Green | Blinking | The system is performing the read-write operation on the hard disk. NOTE:
The ACT indicator does not blink when the read-write operation is performed on the NVMe hard drive. |
||
| - | Off | No hard disk is present. | ||
| - | Hard disk error indicator | Red | Steady on | The hard disk does not work normally. |
| - | Off | The hard disk is working normally. |
Technical Specifications
| Item | Specification |
|---|---|
| Installation type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] |
|
| Dimensions with packaging (H x W x D) [mm(in.)] | 110 mm x 547 mm x 465 mm (4.33 in. x 21.54 in. x 18.31 in.) |
| Chassis height [U] | 1 U |
| Weight with packaging [kg(lb)] | 12 kg (26.4 lb) |
| Weight without packaging [kg(lb)] | 9.5 kg (20.9 lb) |
| CPU | 1.9 GHz, 6 Cores |
| Memory | 32 GB |
| Hard disk | Two hard disk interfaces are supported. SATA, SAS, and NVMe 2.5-inch hard drives are supported. NOTE:
The AR-HDD1TTS-D hard disk (BOM: 02311XKB) is recommended. |
| Console port | RJ45 |
| RTC | Supported |
| Maximum power consumption [W] | 120 W |
| Power supply mode | AC built-in |
| Number of power modules | 1 |
| Rated input voltage [V] | 100 V to 240 V, 50 Hz/60 Hz |
| Input voltage range [V] | 90 V to 264 V, 47 Hz to 63 Hz |
| Maximum input current [A] | 2 A |
| Maximum output power [W] | 150 W |
| Type of fans | Built-in |
| Number of fan modules | 0 |
| Heat dissipation mode | Air cooling |
| Airflow direction | Left to right |
| Extended slots (standard configuration) | 1 x SIC |
| Number of service board slots | 1 |
| Redundant power supply | Not supported |
| RPS input | Not supported |
| PoE | Not supported |
| Noise at normal temperature (acoustic power) [dB(A)] | 56.0 dB(A) |
| Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) NOTE:
When the altitude is 1800 m-5000 m (5906 ft.-16404.2 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% to 95%, noncondensing |
| Long-term operating altitude [m(ft.)] | < 5000 m (16404.2 ft.) |
| MTBF [year] | 37.26 year |
| MTTR [hour] | 2 hour |
| Availability | 0.9999942725 |