Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
E3/T3 Cable
Connection
- Connect the SMB75 connector of one E3/T3 cable to the Tx interface on the 1E3/CE3/T3/CT3 interface card, and the BNC connector to the Rx interface on the remote device.
- Connect the SMB75 connector of one E3/T3 cable to the Rx interface on the 1E3/CE3/T3/CT3 interface card, and the BNC connector to the Tx interface on the remote device.
Pin Assignments
Table 7-35 lists the pin assignments of an E3/T3 cable.
Technical Specifications
Table 7-36 Technical specifications of the E3/T3 Cable
| Item | Details |
|---|---|
| Part Number | 04042685 |
| Model | CSMBTA001 |
| Description | Single Cable, SMB75SF-IV, SYV75-2/0.34(S), BNC75SM-III, 10m, 75 ohm Clock Cable, MD5500 |
| Cable length [m] | 10 m |
| Connector type X1 | SMB75SF-IV |
| Connector type X2 | BNC75SM-III |
If E3/T3 cables need to be prolonged, configure one RF coaxial connector (part number: 14040202) and one 75-ohm trunk extension cable (part number: 04024299) for each E3/T3 cable.