AR6120-VW
Overview
Item | Details |
---|---|
Description | AR6120-VW, 1GE WAN, 1GE combo, 1*10GE SFP+, 8GE LAN, 802.11b/g/n/ac, 2*USB, 2*SIC, build-in 64-channel DSP |
Part Number | 02352CQY |
Model | AR6120-VW |
First supported version | V300R019C00 |
Remarks | When configuring cards, ensure that the total power of the configured cards does not exceed 30 W or contact technical support engineers to obtain more suggestions. |
Appearance
Components
1. USB interface 3.0 (host) |
2. USB interface 2.0 (host) |
3. RST button NOTE:
This button is used to reset the router.
|
4. Two Wi-Fi antennas |
5. Two Wi-Fi antenna interfaces |
6. Two SIC slots |
7. Product model silkscreen |
8. Ground point |
9. Console interface |
10. WAN interface: GE combo interface |
11. WAN interface: one 10GE optical interface |
12. WAN interface: one GE electrical interface |
13. LAN interfaces: eight GE electrical interfaces |
14. PoE power jack NOTE:
The PoE power jack connects to a 150 W PoE Power Adapter to provide power for PDs (such as IP phones, WLAN APs, and cameras) connected to GE interfaces of the router. When the 150 W PoE power adapter is used , a conversion cable (part number: 04052074, delivered with the device) is required. |
15. AC power jack |
16. Jack for power cable locking strap NOTE:
Insert a power cable locking strap in this jack to secure the power cable. |
- |
- |
Slot Layout
Slot Type | Slot ID | Slot Direction | Remarks |
---|---|---|---|
SIC | 1 | Transverse | Slot 1 and slot 2 are combined into new slot 2 (WSIC). |
SIC | 2 | Transverse | Slot 1 and slot 2 are combined into new slot 2 (WSIC). |
Ports
Port | Connector Type | Description | Available Components |
---|---|---|---|
Console interface | RJ45 | The console interface can connect to an operation terminal for onsite configuration.
|
|
LAN interfaces: eight GE electrical interfaces | RJ45 | A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
NOTE:
GE0 is a management interface and is used for web-based management and email-based deployment. All LAN-side GE interfaces can be configured as WAN-side interfaces. |
|
WAN interface: one GE electrical interface | RJ45 | A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
|
|
WAN interfaces: GE combo interfaces | GE electrical interface: RJ45 GE optical port: LC/PC |
A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.
NOTE:
By default, a combo interface works in auto mode and automatically works as an optical or electrical interface. |
The following optical modules are supported: |
WAN interface: one 10GE optical interface | LC/PC | The 10GE optical interfaces (1/10 Gbit/s auto-sensing) can work in GE mode and can transmit and receive service traffic at 1 Gbit/s or 10 Gbit/s.
|
Optical module The following optical modules are supported: |
USB 3.0 port (host) | USB 3.0 Type A | A USB 3.0 interface provides up to 5 Gbit/s upload and download rates.
|
|
USB interface 2.0 (host) | USB 2.0 Type A | A USB 2.0 interface provides up to 480 Mbit/s upload and download rates.
|
USB 2.0-compliant USB flash drive |
Wi-Fi antenna interface | RP-SMA-K (screw threads outside and a pin inside) | A Wi-Fi antenna interface connects to a Wi-Fi antenna to transmit and receive data.
|
Indicators
1. ACT (USB) indicator |
2. SYS indicator |
3. iNET/CTRL indicator |
4. WLAN indicator |
5. GE optical interface indicator (GE8/10GE) |
6. GE electrical interface indicators (WAN) |
7. GE electrical interface indicator (LAN) |
- |
- |
Silkscreen | Name | Color | Status | Description |
---|---|---|---|---|
ACT | ACT (USB) indicators | Green | Steady on | The system has been upgraded or configured using a USB flash drive. |
Green | Blinking | The system is being upgraded or configured using a USB flash drive. | ||
Red | Steady on | The system fails to be upgraded or configured using a USB flash drive. | ||
- | Off | No USB flash drive is connected, the USB interface has failed, or the indicator has failed. | ||
SYS | SYS indicator | Green | Slow blinking | The system is running properly. |
Green | Fast blinking | The system is being powered on or restarting. | ||
Red | Steady on | A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. | ||
- | Off | The system software is not running or is resetting. | ||
iNET/CTRL | iNET/CTRL indicator | Green | Steady on | The controller has been connected. |
Green | Slow blinking | The protocol on the WAN interface is UP but the controller is not connected. | ||
- | Off | The protocol on the WAN interface is not UP. | ||
WLAN | WLAN indicator | Green | Steady on | A WLAN link has been established on the corresponding interface. |
Green | Blinking | The WLAN link is transmitting data. | ||
- | Off | The WLAN link has not been established or is inactive. | ||
- | GE optical interface indicator (GE8/10GE) | Green | Steady on | A link has been established on the corresponding GE/10GE interface. |
Green | Off | No link is established on the interface. | ||
Yellow | Blinking | Data is being transmitted over the link. | ||
Yellow | Off | Off: No data is being transmitted or received. | ||
- | GE electrical interface indicators (WAN) | Green | Steady on | Data is being transmitted or received on the corresponding GE electrical interface. |
Green | Off | No link is established on the corresponding GE electrical interface. | ||
Yellow | Blinking | Data is being transmitted or received on the corresponding GE electrical interface. | ||
Yellow | Off | No data is being transmitted or received on the corresponding GE electrical interface. | ||
- | GE electrical interface indicators (LAN) | Green | Steady on | Data is being transmitted or received on the corresponding GE electrical interface. |
Green | Off | No link is established on the corresponding GE electrical interface. | ||
Yellow | Blinking | Data is being transmitted or received on the corresponding GE electrical interface. | ||
Yellow | Off | No data is being transmitted or received on the corresponding GE electrical interface. |
Technical Specifications
Item | Specification |
---|---|
Installation type |
|
Dimensions without packaging (H x W x D) [mm(in.)] |
|
Dimensions with packaging (H x W x D) [mm(in.)] | 150 mm x 525 mm x 388 mm (5.91 in. x 20.67 in. x 15.28 in.) |
Chassis height [U] | 1 U |
Weight with packaging [kg(lb)] | 4.7 kg (10.3 lb) |
Weight without packaging [kg(lb)] | 2.9 kg (6.39 lb) |
CPU | 1.4 GHz, 4 Cores |
Memory | 2 GB |
NAND Flash | 1 GB |
Console port | RJ45 |
RTC | Supported |
Maximum power consumption [W] | 30 W |
Power supply mode | AC built-in |
Number of power modules | 1 |
Rated input voltage [V] | 100 V to 240 V, 50 Hz/60 Hz |
Input voltage range [V] | 90 V to 264 V, 47 Hz to 63 Hz |
Maximum input current [A] | 2 A |
Maximum output power [W] | 60 W |
Type of fans | Built-in |
Number of fan modules | 0 |
Heat dissipation mode | Air cooling |
Airflow direction | Left to right |
Extended slots (standard configuration) | 2 x SIC |
Number of service board slots | 2 |
Redundant power supply | Not supported |
RPS input | Not supported |
PoE | The GE0 to GE7 interfaces are supported. IEEE 802.3af/IEEE 802.3at |
Relationship between PoE and system power modules [W] | The PoE power jack connects to a 150 W PoE Power Adapter with an Adapter Cable to provide power for PDs (such as IP phones, WLAN APs, and cameras) connected to GE interfaces of the router. |
Maximum PoE output power [W] | 100 W |
PoE power interfaces | 8 |
PoE+ power interfaces | 8 |
PoE++ power interfaces | 0 |
Noise at normal temperature (acoustic power) [dB(A)] | 49.6 dB(A) |
Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) NOTE:
When the altitude is 1800 m-5000 m (5906 ft.-16404.2 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
Long-term operating relative humidity [RH] | 5% to 95%, noncondensing |
Long-term operating altitude [m(ft.)] | < 5000 m (16404.2 ft.) |
MTBF [year] | 36.7 year |
MTTR [hour] | 2 hour |
Availability | 0.9999937802 |