AR6140H-S
Overview
| Item | Details |
|---|---|
| Description | Assembling Components,AR6140H-S,AR6140H-S,AR6140H-S, 4*GE WAN, 4*SFP+, 12*GE LAN, 1*USB2.0, 4*SIC |
| Part Number | 02353NTH |
| Model | AR6140H-S |
| First supported version | V300R019C10 |
Appearance
Components
1. RESET button NOTE:
This button is used to reset the router.
|
2. LAN interfaces: twelve GE electrical interfaces |
3. WAN interfaces: four GE electrical interfaces |
4. WAN interface: four 10GE optical interface |
5. Console interface |
6. USB interface 2.0 (host) |
7. Ground point |
8. Product model silkscreen |
9. Four SIC slots |
10. Two power module slots Applicable power modules: 150W AC Power Module |
- |
- |
Slot Layout
| Slot Type | Slot ID | Slot Direction | Remarks |
|---|---|---|---|
| SIC | 1 | Transverse | Slot 1 and slot 2 are combined into new slot 2 (WSIC). |
| SIC | 2 | Transverse | Slot 1 and slot 2 are combined into new slot 2 (WSIC). |
| SIC | 3 | Transverse | Slot 3 and slot 4 are combined into new slot 2 (WSIC). NOTE:
When only one WSIC card is installed on the router, you can only install the WSIC card in slot 4 (combined of slot 3 and slot 4). |
| SIC | 4 | Transverse | Slot 3 and slot 4 are combined into new slot 2 (WSIC). NOTE:
When only one WSIC card is installed on the router, you can only install the WSIC card in slot 4 (combined of slot 3 and slot 4). |
Ports
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| Console interface | RJ45 | The console interface can connect to an operation terminal for onsite configuration.
|
|
| LAN interfaces: twelve GE electrical interfaces | RJ45 | A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
NOTE:
GE0 is a management interface and is used for web-based management and email-based deployment. All LAN-side GE interfaces can be configured as WAN-side interfaces. |
|
| WAN interfaces: four GE electrical interfaces | RJ45 | A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
|
|
| WAN interface: four 10GE optical interface | LC/PC | The 10GE optical interfaces (1/10 Gbit/s auto-sensing) can work in GE mode and can transmit and receive service traffic at 1 Gbit/s or 10 Gbit/s.
|
Optical module The following optical modules are supported: |
| USB interface 2.0 (host) | USB 2.0 Type A | A USB 2.0 interface provides up to 480 Mbit/s upload and download rates.
|
USB 2.0-compliant USB flash drive |
Indicators
1. PWR indicator |
2. SYS indicator |
3. iNET indicator |
4. CTRL indicator |
5 and 6.
|
7 and 8. 10GE optical interface indicators (10GE0 to 10GE3) |
9. ACT (USB) indicator |
- |
- |
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| PWR | PWR indicator | Green | Steady on | The router is powered by the built-in power module normally. |
| - | Off | The router is not powered on. | ||
| SYS | SYS indicator | Green | Slow blinking | The system is running properly. |
| Green | Fast blinking | The system is being powered on or restarting. | ||
| Red | Steady on | A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. | ||
| - | Off | The system software is not running or is resetting. | ||
| iNET | iNET indicator | Green | Steady on | The network service has been established. |
| - | Off | The network service is unavailable. | ||
| CTRL | CTRL indicator | Green | Steady on | The Agile Controller-Campus has managed the router. |
| - | Off | The Agile Controller-Campus does not manage the router. | ||
| - | GE electrical interface indicators (GE0 to GE13) | Green | Steady on | Data is being transmitted or received on the corresponding GE electrical interface. |
| Green | Off | No link is established on the corresponding GE electrical interface. | ||
| Yellow | Blinking | Data is being transmitted or received on the corresponding GE electrical interface. | ||
| Yellow | Off | No data is being transmitted or received on the corresponding GE electrical interface. | ||
| - | GE electrical interface indicators (GE14 to GE15) | Green | Steady on | Data is being transmitted or received on the corresponding GE electrical interface. |
| Green | Off | No link is established on the corresponding GE electrical interface. | ||
| Yellow | Blinking | Data is being transmitted or received on the corresponding GE electrical interface. | ||
| Yellow | Steady on | No data is being transmitted or received on the corresponding GE electrical interface. | ||
| - | 10GE optical interface indicators (10GE0 to 10GE3) | Green | Steady on | A link has been established on the corresponding 10GE interface. |
| Green | Blinking | Data is being transmitted over the link. | ||
| - | Off | No link is established on the interface. | ||
| ACT | ACT (USB) indicators | Green | Blinking | The system is being upgraded or configured using a USB flash drive. |
| Green | Steady on | The system has been upgraded or configured using a USB flash drive. | ||
| Red | Steady on | The system fails to be upgraded or configured using a USB flash drive. | ||
| - | Off | No USB flash drive is connected, the USB interface has failed, or the indicator has failed. |
Technical Specifications
| Item | Specification |
|---|---|
| Installation type | Rack |
| Dimensions without packaging (H x W x D) [mm(in.)] |
|
| Dimensions with packaging (H x W x D) [mm(in.)] | 225 mm x 550 mm x 530 mm (8.89 in. x 21.65 in. x 20.87 in.) |
| Chassis height [U] | 1 U |
| Weight with packaging [kg(lb)] | 8.06 kg (17.74 lb) |
| Weight without packaging [kg(lb)] | 5.94 kg (13.07 lb) |
| CPU | 1.85 GHz, 16 Cores |
| Memory | 4 GB |
| NAND Flash | 1 GB |
| Console port | RJ45 |
| RTC | Supported |
| Maximum power consumption [W] | 60 W |
| Power supply mode | AC external |
| Number of power modules | 2 |
| Rated input voltage [V] | 100 V to 240 V, 50 Hz/60 Hz |
| Input voltage range [V] | 90 V to 264 V, 47 Hz to 63 Hz |
| Maximum input current [A] | 3 A |
| Maximum output power [W] | 150 W |
| Type of fans | Built-in |
| Number of fan modules | 0 |
| Heat dissipation mode | Air cooling |
| Airflow direction | Left to right |
| Extended slots (standard configuration) | 4 x SIC |
| Number of service board slots | 4 |
| Redundant power supply | Support double AC power supply (1 : 1 backup) |
| RPS input | Not supported |
| PoE | Not supported |
| Noise at normal temperature (acoustic power) [dB(A)] | 57.6 dB(A) |
| Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) NOTE:
When the altitude is 1800 m-5000 m (5906 ft.-16404.2 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% to 95%, noncondensing |
| Long-term operating altitude [m(ft.)] | < 5000 m (16404.2 ft.) |
| MTBF [year] | 51.78 year |
| MTTR [hour] | 2 hour |
| Availability | 0.9999955910 |