AR651C
Overview
| Item | Details |
|---|---|
| Description | AR651C AC host, 10*GE RJ45, 2*GE SFP, 1*USB 3.0 |
| Part Number | 02352RLG |
| Model | AR651C |
| First supported version | V300R019C00 |
| Remarks | Part number of the AR651C: 02352RLG (supported in V300R019C00 and later versions) Part number of the AR651C pre-installed license: 02353YFQ (supported in V300R019C13 and later versions) |
Appearance
Components
1. Ground point |
2. Product model silkscreen |
3. Jack for power cable locking strap NOTE:
Insert a power cable locking strap in this jack to secure the power cable. |
4. Power socket |
5. LAN interfaces: eight GE electrical interfaces |
6. WAN interfaces: two GE electrical interfaces |
7. WAN interfaces: two GE optical interfaces |
8. One USB 3.0 interface |
9. RESET button NOTE:
This button is used to reset the router.
|
One console interface |
- |
- |
Ports
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| Console interface | RJ45 | The console interface can connect to an operation terminal for onsite configuration.
|
|
| GE electrical interface | RJ45 | A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
NOTE:
GE0 is a management interface and is used for web-based management and email-based deployment. All LAN-side GE interfaces can be configured as WAN-side interfaces. |
|
| GE Optical Interface | LC/PC | A GE optical interface can transmit and receive service traffic at 100 Mbit/s or 1000 Mbit/s.
|
Optical module The following optical modules are supported: |
| USB 3.0 port | USB 3.0 Type A | A USB 3.0 interface provides up to 5 Gbit/s upload and download rates.
|
|
Indicators
1. PWR indicator |
2. SYS indicator |
3. USB indicator |
4. iNET indicator |
5. CTRL indicator |
6 and 7. GE electrical interface indicators (GE0 to GE9)
|
8. WAN optical interface indicators (GE10 to GE11) |
- |
- |
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| PWR | PWR indicator | Green | Steady on | The system power supply is normal. |
| - | Off | The system power is off. | ||
| SYS | SYS indicator | Green | Slow blinking | The system is running properly. |
| Green | Fast blinking | The system is being powered on or restarting. | ||
| Red | Steady on | A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. | ||
| - | Off | The system software is not running or is resetting. | ||
| USB | USB indicator | Green | Steady on | The system has been upgraded or configured using a USB flash drive. |
| Green | Blinking | The system is being upgraded or configured using a USB flash drive. | ||
| Red | Steady on | The system fails to be upgraded or configured using a USB flash drive. | ||
| - | Off | No USB flash drive is connected, the USB interface has failed, or the indicator has failed. | ||
| iNET | iNET indicator | Green | Steady on | The network service has been established. |
| - | Off | The network service is unavailable. | ||
| CTRL | CTRL indicator | Green | Steady on | The Agile Controller-Campus has managed the router. |
| Green | Blinking | The plug-and-play deployment is ongoing by the registration query center. | ||
| - | Off | The Agile Controller-Campus does not manage the router. | ||
| - | GE electrical interface indicators (GE0 to GE9) | Green (Link) | Steady on | A link has been established on the interface. |
| Green (Link) | Off | No link is established on the interface. | ||
| Yellow (ACT) | Blinking | Data is being transmitted or received on the interface. | ||
| Yellow (ACT) | Off | No data is being transmitted or received on the interface. | ||
| - | WAN optical interface indicators (GE10 to GE11) | Green | Steady on | A link has been established on the corresponding WAN interface. |
| Green | Blinking | Data is being transmitted or received on the corresponding WAN interface. | ||
| - | Off | No link is established on the corresponding WAN interface. |
Technical Specifications
| Item | Specification |
|---|---|
| Installation type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] |
|
| Dimensions with packaging (H x W x D) [mm(in.)] | 110 mm x 465 mm x 335 mm (4.33 in. x 18.31 in. x 13.19 in.) |
| Chassis height [U] | 1 U |
| Weight with packaging [kg(lb)] | 2.39 kg (5.26 lb) |
| Weight without packaging [kg(lb)] | 1.75 kg (3.85 lb) |
| CPU | 1.2 GHz, 4 Cores |
| Memory | 1 GB |
| NAND Flash | 1 GB |
| Console port | RJ45 |
| RTC | Supported |
| Maximum power consumption [W] | 22 W |
| Number of power modules | 1 |
| Rated input voltage [V] | 100 V to 240 V, 50 Hz/60 Hz |
| Input voltage range [V] | 90 V to 264 V, 47 Hz to 63 Hz |
| Maximum input current [A] | 3 A |
| Maximum output power [W] | 36 W |
| Type of fans | None |
| Number of fan modules | 0 |
| Heat dissipation mode | Natural heat dissipation NOTE:
The router uses natural heat dissipation. Compared with the air-cooled model, the router surface temperature is high when the device is working properly. This is a normal phenomenon and meets the safety requirements. The router functions and reliability are not affected. |
| Redundant power supply | Not supported |
| PoE | Not supported |
| Noise at normal temperature (acoustic power) [dB(A)] | 0 (Natural heat dissipation) |
| Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) NOTE:
When the altitude is 1800 m-5000 m (5906 ft.-16404.2 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | < 5000 m (16404.2 ft.) |
| MTBF [year] | 60.61 year |
| MTTR [hour] | 2 hour |
| Availability | 0.9999962333 |