Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
3G Indoor Remote Antenna
Connection
The 3G indoor remote antenna is delivered with a 3 m feeder, which is directly connected to the 3G antenna port of the device. It is recommended that the 3G indoor remote antenna be used in cabinet scenarios.
Appearance and Structure
Figure 7-46 Appearance of the 3G Indoor Remote Antenna
![]()
3G indoor remote antennas are optional and need to be purchased separately if required.
Technical Specifications
Table 7-72 Technical specifications of the 3G Indoor Remote Antenna
| Item | Details |
|---|---|
| Part Number | 27010824 |
| Model | ASMAM0001 |
| Description | Isotropic Antenna, 824-960/1710-2170MHz, >=1.0dBi(824-960MHz)&>=2.5dBi(1710-2170MHz), Vertical, Omni, 10W, 0r, SMA-Male, do not need bracket |
| Frequency bands supported | - 824 MHz to 960 MHz - 1710 MHz to 2170 MHz |
| Maximum gain [dBi] | - 2.15 dBi - 3 dBi |
| Standing wave | 2.5 |
| Polarization | Vertical |
| Direction | Omnidirectional |
| Cable length [m] | 0.26 m |
| Connector type X1 | SMA-M |