AR-10 (Service and Router Unit)
Overview
| Item | Details |
|---|---|
| Description | Service and Router Unit |
| Part Number | 03029SJD |
| Model | AR-10 |
| Silkscreen | AR-10 |
| Remarks | The AR-10 card is supported in V300R021C00 and later versions and works with the FusionCube500. |
Appearance
Indicators and Buttons
1. PWR indicator |
2. SYS indicator |
3. iNET indicator |
4. CTRL indicator |
5 and 6. GE electrical interface indicators
|
7 and 8. GE optical interface indicators
|
9. ACT (USB) indicator NOTE:
The ACT (USB) indicator is supported in the current version. |
10. RESET button |
- |
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| PWR | PWR indicator | Green | Steady on | The device is powered by the built-in power module normally. |
| - | Off | The device is not powered on. | ||
| SYS | SYS indicator | Green | Slow blinking | The system is running properly. |
| Green | Fast blinking | The system is being powered on or restarting. | ||
| Yellow | Steady on | A fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. | ||
| - | Off | The system software is not running or is resetting. | ||
| iNET | iNET indicator | Green | Steady on | The network service has been established. |
| - | Off | The network service is unavailable. | ||
| CTRL | CTRL indicator | Green | Steady on | The Agile Controller-Campus has managed the router. |
| CTRL | CTRL indicator | - | Off | The Agile Controller-Campus does not manage the router. |
| - | GE electrical interface indicators | Green (Link) | Steady on | A link has been established on the interface. |
| Green (Link) | Off | No link is established. | ||
| Yellow (ACT) | Blinking | Data is being transmitted or received on the interface. | ||
| Yellow (ACT) | Off | No data is being transmitted or received on the interface. | ||
| - | GE optical interface indicators | Green (Link) | Steady on | A link has been established on the interface. |
| Green (Link) | Off | No link is established. | ||
| Yellow (ACT) | Blinking | Data is being transmitted or received on the interface. | ||
| Yellow (ACT) | Off | No data is being transmitted or received on the interface. |
| Silkscreen | Name | Description |
|---|---|---|
| RESET | RESET button | This button is used to reset the router.
Resetting the router will interrupt services. Exercise caution when deciding to press this button. |
Ports
1. USB 2.0 interface |
2. Console interface |
3. LAN interfaces: four GE electrical interfaces |
4. LAN interface: GE optical interface |
5. WAN interface: GE optical interface |
- |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| Console interface | RJ45 | The console interface of a router can connect to an operation terminal for onsite configuration.
|
|
| USB 2.0 interface | USB 2.0 Type A | A USB interface provides up to 480 Mbit/s upload and download rates.
|
USB 2.0 standard USB flash drive |
| LAN interfaces: four GE electrical interfaces | RJ45 | A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
NOTE:
GE0 is the management network port on a device. It can implement web-based network management and email-based deployment. All GE LAN interfaces can be configured as WAN interfaces. GE2 and GE3, as electrical interfaces for capacity expansion, are used with corresponding internal cascading interfaces of the AR-10 card as combo interfaces. By default, the combo interfaces work in auto mode. You can run the combo-port command to switch their working modes. A combo electrical interface and the corresponding internal cascading interface are logically exclusive. That is, the combo electrical interface and the corresponding internal cascading interface cannot work at the same time. When one of the interfaces is used, the other interface is automatically disabled. |
|
| LAN interface: GE optical interface | LC/PC | The GE optical interfaces (100/1000 Mbit/s auto-sensing) can work in GE mode and can transmit and receive service traffic at 100 Mbit/s or 1000 Mbit/s.
|
Optical module The following optical modules are supported: |
| WAN interface: GE optical interface | LC/PC | The GE optical interfaces (100/1000 Mbit/s auto-sensing) can work in GE mode and can transmit and receive service traffic at 100 Mbit/s or 1000 Mbit/s.
|
Optical module The following optical modules are supported: |
Functions and Features
| Functions and Features | Description |
|---|---|
| Overview | An AR-10 is the core board for route forwarding, service processing, and inter-board switching. |
| Basic function | Stores system configuration data, startup files, upgrade software, and system running logs. |
| Control module | Implement functions such as protocol processing, route calculation, forwarding control, system management, and system security. |
| Switching module | Provides high-speed channels for service switching functions. |
| Clock module | Not supported |
Technical Specifications
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] | 56.8 mm x 105.4 mm x 409.5 mm (2.24 in. x 4.15 in. x 16.12 in.) |
| Weight without packaging [kg(lb)] | 1.05 kg (2.31 lb) |
| Maximum power consumption [W] | 20 W |
| Long-term operating temperature [°C(°F)] | 0°C to 55°C (32°F to 131°F) |
| Long-term operating relative humidity [RH] | 5% to 95%, noncondensing |
| CPU | 4-core, 1.4 GHz |
| Memory | 4 GB |
| NAND Flash | 1 GB |
| Hard disk | Not supported |
| DSP slot | Not supported |
| Console management port | RJ45 |
| Hot swapping | Supported |