Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
2VDSL2 Cable
Connection
A 2VDSL2 cable is connected as follows:
- The X1 (RJ11) connector on one end is connected to a router or a board.
- The X2 (RJ11) or X3 (RJ11) connector on the other end is connected to an analog telephone or fax machine.
Appearance and Structure
Figure 8-53 Structure of the 2VDSL2 Cable
![]()
A 2VDSL2 cable is applicable to the router or the board which supports VDSL interface bounding. Table 8-81 lists the interface type of a 2VDSL2 cable.
Pin Assignments
Table 8-82 lists the pin assignments of a 2VDSL2 cable.
Technical Specifications
Table 8-83 Technical specifications of the 2VDSL2 Cable
| Item | Details |
|---|---|
| Part Number | 04070342 |
| Model | C00VSDL01 |
| Description | Signal Cable,VDSL Cable,3.0m,MP6,CC2P0.48B(S),2*MP6 |
| Cable length [m] | 3 m |
| Connector type X1 | RJ11 |
| Connector type X2 | RJ11 |
| Connector type X3 | RJ11 |
