No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Ethernet Switching

AR650, AR1600, and AR6100 V300R003

This document describes how to configure the components for LAN services, including link aggregation groups, VLANs, voice VLANs, MAC address tables, transparent bridging, as well as GVRP, STP/RSTP, and MSTP protocols.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of the Remote Bridging Integrated with IP Routing

Verifying the Configuration of the Remote Bridging Integrated with IP Routing

Prerequisites

The configurations for remote bridging integrated with IP routing are complete.

Procedure

  • Run the display interface bridge-if [ bridge-id ] command to check information about the Bridge-if interface.
  • Run the display bridge [ bridge-id ] information command to check information about the remote bridge group.
  • Run the display bridge traffic [ bridge bridge-id | interface interface-type interface-number ] command to view the traffic statistics on the bridge group.
Download
Updated: 2019-04-12

Document ID: EDOC1100041791

Views: 57131

Downloads: 38

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next