No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Ethernet Switching

AR650, AR1600, and AR6100 V300R003

This document describes how to configure the components for LAN services, including link aggregation groups, VLANs, voice VLANs, MAC address tables, transparent bridging, as well as GVRP, STP/RSTP, and MSTP protocols.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the MSTP Mode

Configuring the MSTP Mode


Before configuring basic MSTP functions, set the working mode of a switching device to MSTP. MSTP is compatible with STP and RSTP.


  1. Run system-view

    The system view is displayed.

  2. Run stp mode mstp

    The working mode of the switching device is set to MSTP. By default, the working mode is MSTP.

    STP and MSTP cannot recognize packets of each other, but MSTP and RSTP can. If an MSTP-enabled switching device is connected to switching devices running STP, interfaces of the MSTP-enabled switching device connected to devices running STP automatically transition to STP mode, and other interfaces still work in MSTP mode. This enables devices running different spanning tree protocols to interwork with each other.

Updated: 2019-04-12

Document ID: EDOC1100041791

Views: 64697

Downloads: 41

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next