No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Ethernet Switching

AR650, AR1600, and AR6100 V300R003

This document describes how to configure the components for LAN services, including link aggregation groups, VLANs, voice VLANs, MAC address tables, transparent bridging, as well as GVRP, STP/RSTP, and MSTP protocols.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for MAC Address Tables

Licensing Requirements and Limitations for MAC Address Tables

Involved Network Elements

None

Licensing Requirements

MAC is a basic feature of a router and is not under license control.

Feature Limitations

When deploying a MAC address on the router, pay attention to the following:

  • Dynamic MAC address entries can be learned on an interface only after the interface is added to an existing VLAN.
  • Each static MAC address entry can have only one outbound interface.
  • When the aging time of dynamic MAC address entries is set to 0, dynamic MAC address entries do not age. To age MAC address entries, delete the aging time configuration.
Download
Updated: 2019-04-12

Document ID: EDOC1100041791

Views: 63989

Downloads: 41

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next