No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Ethernet Switching

AR650, AR1600, and AR6100 V300R003

This document describes how to configure the components for LAN services, including link aggregation groups, VLANs, voice VLANs, MAC address tables, transparent bridging, as well as GVRP, STP/RSTP, and MSTP protocols.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for VLAN Mapping

Licensing Requirements and Limitations for VLAN Mapping

This section describes VLAN Mapping configuration notes.

Involved Network Elements


Licensing Requirements

VLAN Mapping is a basic feature of a router and is not under license control.

Feature Limitations

When deploying VLAN Mapping on the router, pay attention to the following:

  • Before configuring VLAN mapping on an interface, add the interface to a network bridge. If the interface is deleted from the network bridge, the VLAN mapping configuration is also deleted from the interface.
  • You can configure only one of QinQ, selective QinQ, and VLAN mapping on a sub-interface.
Updated: 2019-04-12

Document ID: EDOC1100041791

Views: 63588

Downloads: 41

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next