No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Ethernet Switching

AR650, AR1600, and AR6100 V300R003

This document describes how to configure the components for LAN services, including link aggregation groups, VLANs, voice VLANs, MAC address tables, transparent bridging, as well as GVRP, STP/RSTP, and MSTP protocols.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic SEP Functions

Configuring Basic SEP Functions

When there is no faulty link on a ring network running SEP, SEP can eliminate loops on the Ethernet. When a link fault occurs on the ring network, SEP can immediately restore the communication between the nodes on the network.

Pre-configuration Tasks

Before configuring basic SEP functions, complete the following tasks:

  • Establishing the ring networking

  • Ensuring that the devices are powered on correctly and operate properly

Download
Updated: 2019-04-12

Document ID: EDOC1100041791

Views: 64224

Downloads: 41

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next