No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Ethernet Switching

AR650, AR1600, and AR6100 V300R003

This document describes how to configure the components for LAN services, including link aggregation groups, VLANs, voice VLANs, MAC address tables, transparent bridging, as well as GVRP, STP/RSTP, and MSTP protocols.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
References for Transparent Bridging

References for Transparent Bridging

The following table lists the references of this document.

Document

Description

Remarks

RFC 1490

Multiprotocol Interconnect over Frame Relay

-

RFC 1483

Multiprotocol Encapsulation over ATM Adaptation Layer 5

-

RFC 3518

Point-to-Point Protocol (PPP) Bridging Control Protocol (BCP)

-

IEEE 802.1D

Media Access Control (MAC) Bridges

-

IEEE 802.1G

Remote Media Access Control (MAC) Bridges

-

Download
Updated: 2019-04-12

Document ID: EDOC1100041791

Views: 64173

Downloads: 41

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next