Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Remote Bridging Integrated with IP Routing
Configuring remote bridging integrated with IP routing allows users in different geographical locations and on different network segments to communicate with each other.
- Creating a Bridge Group
- Adding a LAN-side Interface to a Bridge Group
- Adding a WAN-side Interface to a Bridge Group
- Enabling IP Routing for a Bridge Group
- (Optional) Disabling a Bridge Group from Bridging Specified Protocol Packets
- (Optional) Configuring a MAC Address Table for a Bridge Group
- Verifying the Configuration of the Remote Bridging Integrated with IP Routing
Previous
