No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Ethernet Switching

AR650, AR1600, and AR6100 V300R003

This document describes how to configure the components for LAN services, including link aggregation groups, VLANs, voice VLANs, MAC address tables, transparent bridging, as well as GVRP, STP/RSTP, and MSTP protocols.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Auto Mode of Adding a Port to the Voice VLAN

Configuring the Auto Mode of Adding a Port to the Voice VLAN

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run voice-vlan mode auto

    The mode in which ports are added to a voice VLAN is set to auto.

    By default, ports are automatically added to a voice VLAN.

    NOTE:
    Access ports cannot be automatically added to a voice VLAN. To add an access port to a voice VLAN, run the port link-type command to change the link type to trunk or hybrid.

Download
Updated: 2019-04-12

Document ID: EDOC1100041791

Views: 58323

Downloads: 40

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next