No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Ethernet Switching

AR650, AR1600, and AR6100 V300R003

This document describes how to configure the components for LAN services, including link aggregation groups, VLANs, voice VLANs, MAC address tables, transparent bridging, as well as GVRP, STP/RSTP, and MSTP protocols.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring TC Protection on a Switching Device

Configuring TC Protection on a Switching Device

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run stp tc-protection threshold threshold

    The maximum number of times the switching device processes TC BPDUs and updates forwarding entries within the specified time period is set.

    NOTE:

    The time period is set by the stp tc-protection interval command.

Download
Updated: 2019-04-12

Document ID: EDOC1100041791

Views: 58050

Downloads: 40

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next