No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR650, AR1600, and AR6100 V300R003

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting a Value for the Color Attribute

Setting a Value for the Color Attribute

You can set a value for the Color attribute so that the value is carried in service routes to generate tunnel encapsulation information.

Context

A value for the Color attribute is set on a PE. The value is carried in service routes to generate tunnel encapsulation information.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run route-policy route-policy-name { permit | deny } node node

    A route-policy node is created, and the route-policy view is displayed.

  3. Run apply extcommunity { color priority:site-id } & <1-16> [ additive ]

    A value is set for the Color attribute in BGP routes.

Download
Updated: 2019-04-12

Document ID: EDOC1100041799

Views: 31184

Downloads: 43

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next