No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR650, AR1600, and AR6100 V300R003

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IPSec Tunnel Configuration

Verifying the IPSec Tunnel Configuration

Prerequisites

All configurations of the IPSec tunnel have been completed.

Procedure

  • Run the display ipsec proposal [ brief | name proposal-name ] or display ipsec proposal [ brief | name proposal-name ] ctrl-plane command to check information about the IPSec proposal.
  • Run the display ipsec p2mp-policy [ name policy-name ] command to check configuration information about the IPSec P2MP security policy.
  • Run the display ipsec local p2mp-sa command to check configuration information about the local IPSec P2MP SA.
  • Run the display ipsec peer p2mp-sa command to check configuration information about the remote IPSec P2MP SA.
Download
Updated: 2019-04-12

Document ID: EDOC1100041799

Views: 31538

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next