No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR650, AR1600, and AR6100 V300R003

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Primary Channel

(Optional) Configuring a Primary Channel

Context

In an auto VPN scenario, configuring a primary channel can implement synchronization and backup of information including the flow table, route selection result in SPR, and TNP between two gateways.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ms-channel

    The primary channel view is displayed.

  3. Run channel-ip-port local-ip ip-address local-data-port port peer-ip ip-address peer-data-port port [ vpn-instance vpn-instance-name ]

    A primary channel is configured.

Download
Updated: 2019-04-12

Document ID: EDOC1100041799

Views: 31629

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next