No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR650, AR1600, and AR6100 V300R003

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Prerequisites for Configuring Auto VPN

Prerequisites for Configuring Auto VPN

Before configuring auto VPN functions, familiarize yourself with the usage scenario, complete the pre-configuration tasks, and obtain the data required for the configuration.

Usage Scenario

When a carrier provides services for tenants, auto VPN is deployed to separate the service network from the transport network. This allows full-mesh tunnels to be established between PEs on the transport network and ensures secure transmission on the service network.

Figure 1-9 shows a Tunnel-encap-ext network.

Figure 1-9  Auto vpn networking model

Prerequisites

Before configuring auto VPN, complete the following configurations:

  • The Agile Controller-Campus has delivered site TNP configurations to PEs.

    For detailed configurations, see Configuring TNP information of a site in Huawei AR650&AR1600&AR6100 Series Routers NETCONF YANG API.

  • The Agile Controller-Campus has delivered interface TNP configurations to PEs.

    For detailed configurations, see Configuring TNP information of an interface in Huawei AR650&AR1600&AR6100 Series Routers NETCONF YANG API.

  • The Agile Controller-Campus has delivered DTLS configurations to PEs and CEs.

    For detailed configurations, see DTLS in Huawei AR650&AR1600&AR6100 Series Routers NETCONF YANG API.

  • There are reachable routes between the WAN interface's IP address and the public network.

Data Preparation

To configure auto VPN functions, you need the following data.

No.

Data

1

IP addresses of interfaces interconnecting the PEs or connecting the PEs to the RR

Download
Updated: 2019-04-12

Document ID: EDOC1100041799

Views: 34282

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next