No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR650, AR1600, and AR6100 V300R003

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Ethernet over mGRE Application

Ethernet over mGRE Application

In Figure 2-9, the enterprise headquarters (Hub) and branches (Spokes) use Ethernet networks and are connected by an IP backbone network. Ethernet packets between the Hub and Spokes need to be transparently transmitted over mGRE tunnels.

Figure 2-9  Ethernet over mGRE application

Ethernet over mGRE can be configured on Spoke1, Spoke2, and Hub and Layer 2 VE interfaces are bound to the physical Ethernet interfaces and tunnel interfaces to transparently transmit Ethernet packets over mGRE tunnels.

Download
Updated: 2019-04-12

Document ID: EDOC1100041799

Views: 31799

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next