No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR650, AR1600, and AR6100 V300R003

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the IPSec P2MP Security Policy Function on a Tunnel Interface

Enabling the IPSec P2MP Security Policy Function on a Tunnel Interface

Context

In a tunnel optimization scenario, you need to enable the IPSec P2MP security policy function on a tunnel interface before performing IPSec encryption for BGP packets.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface tunnel interface-number

    The virtual tunnel interface view is displayed.

  3. Run ipsec p2mp-policy enable

    The IPSec P2MP security policy function is enabled on a tunnel interface.

    By default, the IPSec P2MP security policy function is disabled on a tunnel interface.

Download
Updated: 2019-04-12

Document ID: EDOC1100041799

Views: 31505

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next