No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR650, AR1600, and AR6100 V300R003

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Redundancy Control of IPSec Tunnels

(Optional) Configuring Redundancy Control of IPSec Tunnels

Context

On a live network, to improve network reliability, a branch gateway connects to the headquarters using multiple links. The branch gateway needs to determine on which link an IPSec tunnel is established. You can associate IPSec with NQA so that the branch gateway controls IPSec tunnel setup or teardown according to the , which ensures that only one link is available at any time. The association implements redundancy control of the IPSec tunnel.

Prerequisites

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ipsec policy policy-name seq-number isakmp

    The view of the ISAKMP IPSec policy is displayed.

  3. Run connect track { nqa admin-name test-name | nqa-group nqa-group-name } { up | down }

    The device is configured to control IPSec tunnel setup according to status.

    By default, the device is configured to not control IPSec tunnel setup according to status.

  4. Run disconnect track { nqa admin-name test-name | nqa-group nqa-group-name } { up | down }

    The device is configured to control IPSec tunnel teardown according to status.

    By default, the device is configured to not control IPSec tunnel teardown according to status.

Download
Updated: 2019-04-12

Document ID: EDOC1100041799

Views: 31582

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next