No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR650, AR1600, and AR6100 V300R003

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an IPSec P2MP Security Policy

Configuring an IPSec P2MP Security Policy

Context

An IPSec point-to-multipoint (P2MP) security policy is a prerequisite for creating SAs and determines the methods used to protect specified data flows.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ipsec p2mp-policy policy-name

    An IPSec P2MP security policy is created and the IPSec P2MP security policy view is displayed.

    By default, no IPSec P2MP security policy is configured in the system.

  3. Run proposal proposal-name

    An IPSec proposal is referenced.

    By default, no IPSec proposal is referenced in the system.

    proposal-name specifies a created IPSec proposal.

    An IPSec P2MP security policy can reference only one IPSec proposal. A new IPSec proposal can be referenced only after the precious referenced one has been deleted.

  4. (Optional) Run sa duration time-based minutes

    The lifetime of an IPSec SA in the IPSec P2MP security policy is configured.

    By default, the lifetime of an IPSec SA in an IPSec P2MP security policy is 1440 minutes.

  5. (Optional) Run anti-replay enable

    The IPSec anti-replay function is enabled.

    By default, the IPSec anti-replay function is enabled.

  6. (Optional) Run anti-replay window window-size

    The anti-replay window size of a single IPSec tunnel is configured.

    By default, the anti-replay window size of a single IPSec tunnel is not configured on a device and the system uses the current global IPSec anti-replay window size.

Download
Updated: 2019-04-12

Document ID: EDOC1100041799

Views: 31292

Downloads: 43

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next