No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PKI Entity

PKI Entity

Context

A certificate binds a public key to a set of information that uniquely identifies a public key interface (PKI) entity. The parameters of an entity indicate the identity information of the entity. A Certificate Authority (CA) uniquely identifies a certificate applicant based on identity information provided by an entity.

Procedure

  • Creating a PKI entity
    1. Access the PKI Entity tab page.

      Log in to the web platform and choose Security > PKI > PKI Entity. As show in Figure 14-47.

      Figure 14-47   PKI Entity

    2. Click Create and set parameters in the Create PKI Entity dialog box that is displayed. Table 14-22 describes the parameters. As show in Figure 14-48.

      Figure 14-48   Create PKI Entity

      Table 14-22  PKI entity parameters

      Parameter

      Description

      PKI entity name

      Name of a PKI entity.

      Common name

      Common name of a PKI entity.

      IP address

      IP address of a PKI entity.

      Domain name

      Fully qualified domain name (FQDN) of a PKI entity.

      Country/Area

      Country name or province name of a PKI entity.

      State/Province

      State name or province name of a PKI entity.

      Geographical area

      Geographic area of a PKI entity.

      Organization

      Organization name of a PKI entity.

      Department

      Department name of a PKI entity.

    3. Click OK.
  • Modifying a PKI entity
    1. Access the PKI Entity tab page.

      Log in to the web platform and choose Security > PKI > PKI Entity.

    2. Select a PKI entity in the PKI Entity Information List area, and click .
    3. In the Modify PKI Entity dialog box that is displayed, modify the parameters. The parameter PKI entity name cannot be modified. The parameters are the same as those in Figure 14-48
    4. Click OK.
  • Deleting a PKI entity
    1. Access the PKI Entity tab page.

      Log in to the web platform and choose Security > PKI > PKI Entity.

    2. Select the check box of a PKI entity and click Delete.
    3. In the dialog box that is displayed, click OK.

      NOTE:

      When a PKI entity is referenced by a PKI domain, delete the PKI entity from the PKI domain before you delete the PKI entity.

Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 35933

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next