No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ACL Filtering

ACL Filtering

Context

An ACL is a set of rules that can only differentiate packets.

After ACLs are configured, you can configure ACL filtering to apply the ACLs so that packets are filtered.

Procedure

  • Creating an ACL filtering rule
    1. Access the ACL Filtering tab page.

      Log in to the web platform and choose Security > Security Protection > ACL Filtering, as shown in Figure 14-41.
      Figure 14-41  ACL Filtering

    2. Click Create and set parameters in the Create ACL Filtering dialog box as shown in Figure 14-42. Table 14-19 describes the parameters.

      Figure 14-42  Create ACL Filtering

    3. Click OK. An ACL filtering rule is added to the ACL filtering list.

      Table 14-19  ACL filtering rule parameters

      Parameter

      Description

      Interface name

      Name of the interface where an ACL filtering rule is applied.

      IPv4 ACL name

      Name of a IPv4 ACL to apply.

      NOTE:

      You can select a created basic ACL or advanced ACL from the ACL name drop-down list box.

      IPv6 ACL name

      Name of a IPv6 ACL to apply.

      NOTE:

      You can select a created basic ACL or advanced ACL from the ACL name drop-down list box.

      Layer 2 ACL name

      Name of a layer 2 ACL to apply.

      NOTE:

      You can select a created Layer 2 ACL from the ACL name drop-down list box.

      Direction

      Direction of the interface where an ACL filtering rule is applied.

  • Modifying an ACL filtering rule
    1. Access the ACL Filtering tab page.

      Log in to the web platform and choose Security > Security Protection > ACL Filtering.

    2. Click of an ACL filtering rule.
    3. In the Modify ACL Filtering dialog box, modify the parameters listed in Table 14-19. The parameters are the same as those in Figure 14-42. The parameters Interface name and Direction cannot be modified.
    4. Click OK.
  • Deleting an ACL filtering rule
    1. Access the ACL Filtering tab page.

      Log in to the web platform and choose Security > Security Protection > ACL Filtering.

    2. Select the check box of an ACL filtering rule and click Delete.
    3. In the dialog box that is displayed, click OK.
Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 35980

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next