No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Initial Configuration of the Web Platform

Initial Configuration of the Web Platform

Context

When logging in to the web platform, you need to perform initial configurations to implement basic communications.

Procedure

  1. Choose Configuration Wizard > Internet Access Wizard.

    Configure interfaces connected to the Internet, set parameters for accessing the Internet, and configure LAN information according to Internet Access Wizard.

    After these configurations are complete, hosts on the LAN can access the Internet using the router.

  2. Check the software version and license.
    1. Click Device Information.
    2. In the Device Information window, view the software version.

      To view the latest software version, access the technical support center on the Huawei website.

      After downloading the latest version, see System Software to upgrade system software.

    3. In the License Information window, view license information.

      Some functions of the router are restricted by the license, so you must check whether information about the current license is the same as information about the purchased one. If the value of License Status is not activated, see License Management to apply and activate the license. If license information is different from information about the purchased information, see Obtaining Technical Support to contact technical support personnel for help.

    NOTE:

    Only super administrators (levels 3 to 15) can upgrade system software and view license authorization information.

  3. Back up the configuration file.

    After completing the initial configuration, click Save in the upper right corner. Choose System Management > Upgrade and Maintenance > Restart Device. Click Export Configuration File to back up the configuration file for diagnosing or rectifying faults in the future. You are advised to back up the configuration file when the router configuration is changed a lot.

    NOTE:

    Only super administrators (levels 3 to 15) can back up configuration files.

Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 35586

Downloads: 92

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next