No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Time Range

Time Range

Context

To start services or functions periodically or in a specified period of time, you can set a time range for ACL rules.

Procedure

  • Creating a time range
    1. Access the Time Range tab page.

      Log in to the web platform and choose Security > ACL > Time Range, as shown in Figure 14-13.
      Figure 14-13  Time Range

    2. Click Create and set parameters in the Create Time Range dialog box, as shown in Figure 14-14. Table 14-4 describes the parameters.

      Figure 14-14  Create Time Range

    3. Click OK. The created time range is displayed.

      Table 14-4  Time range parameters

      Parameter

      Description

      Time range name

      Name of a time range during which ACL rules take effect.

      Periodic Time Range

      Period during which ACL rules take effect. The Periodic Time Range area has parameters Validity time week, Start time, and End time.

      Set Validity time week to one or more days of the week.

      Both the values of Start time and End time range from 00:00 to 23:59. When both the start time and end time are set to 00:00, the ACL validity period starts at 0 am and ends at 12 pm.

      After setting the three parameters, click Add. To create multiple ACL validity periods, repeat this procedure.

      Valid Period

      Time range during which ACL rules take effect. The Valid Period area has parameters Start time and End time.

      After setting the two parameters, click Add. To create multiple validity time ranges, repeat this procedure.

      NOTE:

      If the end time is not specified, the device takes the allowed maximum value, for example, 23:59 2099/12/31.

  • Modifying a time range
    1. Access the Time Range tab page.

      Log in to the web platform and choose Security > ACL > Time Range.

    2. Click next to a time range.
    3. In the Modify Time Range dialog box, modify the parameters listed in Table 14-4. The parameters are the same as those in Figure 14-14. The parameter Time range name cannot be modified. To delete a validity time range, click in the Time Range Has Been Added area.
    4. Click OK.
  • Deleting a time range
    1. Access the Time Range tab page.

      Log in to the web platform and choose Security > ACL > Time Range.

    2. Select the check box of a validity period and click Delete.
    3. In the dialog box that is displayed, click OK.
Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 37953

Downloads: 103

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next