No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Whitelist

Whitelist

Context

The whitelist is applicable to the network where some devices send valid service packets that look like IP sweeping attacks or port scanning attacks. The whitelist prevents these devices from being added to the blacklist.

A whitelist filters packets based on source IP addresses. IP addresses in the whitelist are not added to the static or dynamic blacklist.

Procedure

  • Create a whitelist entry
    1. Access the Whitelist tab page.

      Log in to the web platform and choose Security > Firewall > Whitelist, as shown in Figure 14-23.

      Figure 14-23  Configuring whitelist

    2. Click Create and set parameters in the Create Whitelist dialog box that is displayed, as shown in Figure 14-24. Table 14-9 describes the parameters.

      Figure 14-24  Creating a whitelist

    3. Click OK. A whitelist entry is added to the whitelist.

      Table 14-9  Whitelist parameters

      Parameter

      Description

      IP address

      IP address to be added to the whitelist. The value is a valid IPv4 address.

      Validity period (minute)

      Aging time of a whitelist entry. The value is an integer that ranges from 1 to 1000, in minutes. If no aging time is specified, the IP address is always valid in the whitelist.

  • Modify a whitelist entry
    1. Access the Whitelist tab page.

      Log in to the web platform and choose Security > Firewall > Whitelist.

    2. Click of a whitelist entry.
    3. In the Modify Whitelist dialog box that is displayed, modify parameters listed in Table 14-9.The parameters are the same as those in Figure 14-24. The parameter IP address cannot be modified.
    4. Click OK.
  • Deleting a whitelist entry
    1. Access the Whitelist tab page.

      Log in to the web platform and choose Security > Firewall > Whitelist.

    2. Select a whitelist entry and click Delete. In the Information dialog box that is displayed, click OK.
  • Searching a whitelist entry
    1. Access the Whitelist tab page.

      Log in to the web platform and choose Security > Firewall > Whitelist.

    2. Enter an IP address in the IP address text box and click Search. You can view, modify, or delete the searched whitelist entry.
Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 33470

Downloads: 81

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next