No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deep Security Configuration Wizard

Deep Security Configuration Wizard

Context

In the deep security configuration wizard, the intrusion defense policy and URL filtering policy use default settings. You can modify their settings according to your needs. For details, see Deep Security.

Procedure

  1. Configure Zone
    1. Choose Configuration Wizard > Deep Security Configuration Wizard to open the Deep Security Configuration Wizard page.

    2. Set Source zone and Destination zone. Table 10-11 describes the parameters.

      Table 10-11  Parameters for configuring zones

      Parameter

      Description

      Source zone

      Security zone from which traffic is sent, which has a high security. The source zone can be the default or user-defined security zone.

      For details about how to configure a security zone, see Zone Policy.

      Destination zone

      Security zone for which traffic is destined, which has a low priority. The destination zone must exist.

      For details about how to configure a security zone, see Zone Policy.

    3. Click Next.
  2. Configure IPS

    Click Configure IPS, open the Configure IPS page. Select Enable for IPS and click Next.

  3. Configure URL Filtering
    1. Select Enable for URL Filtering.

    Table 10-12 describes the parameters.

    Table 10-12  Parameters for configuring URL filtering

    Parameter

    Description

    URL Filtering

    Whether the URL filtering function is enabled.

  4. Confirm Settings

    Click Finish. The configuration is complete.

Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 38877

Downloads: 105

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next