No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Static Routes

Configuring Static Routes

This section describes how to configure static routes.

Context

Generally, static routes are applicable to the networks with simple structures. Configuring static routes facilitates route management.

Procedure

  1. Create a static route.
    1. Choose IP Service > Route > Static Route Configuration.

      Figure 13-13  Static route configuration

    2. Configure IPv4 or IPv6 static routes as required.

      • Configure an IPv4 static route.
        1. In IPv4 Static Route Configuration Table, click Create. The Create IPv4 Static Route Service page is displayed.

        2. Set parameters and click OK.

          Table 13-11  IPv4 static route configuration

          Item

          Description

          Destination IP address

          Set the destination IP address of a IPv4 static route.

          Subnet mask

          Set the subnet mask of a IPv4 static route in dotted decimal notation.

          VPN instance

          Specifies the name of a VPN instance. If the VPN instance name is specified, a static route searches the routing table of the VPN instance for an outbound interface according to Next hop.

          Next hop

          Set the next-hop IP address of a IPv4 static route.

          Outbound interface

          Configure an outbound interface for a IPv4 static route.

          Priority

          Set the priority of a IPv4 static route. A smaller value indicates a higher priority.

          Description

          Set the description information of a IPv4 static route.

          NOTE:
          • When both the destination IP address and mask are 0.0.0.0, the configured route is the default route.
          • If the outbound interface is not a point-to-point interface, the next hop address must be specified.
      • Configure an IPv6 static route.
        1. In IPv6 Static Route Configuration Table, click Create. The Create IPv6 Static Route Service page is displayed.

        2. Set parameters and click OK.

          Table 13-12  IPv6 static route configuration

          Item

          Description

          Destination IP address

          Set the destination IPv6 address of a IPv6 static route.

          Subnet prefix length

          Set the prefix length of the destination IPv6 address.

          VPN instance

          Specifies the name of a VPN instance. If the VPN instance name is specified, a static route searches the routing table of the VPN instance for an outbound interface according to Next Hop.

          Next hop

          Set the next-hop IPv6 address of a IPv6 static route.

          Outbound interface

          Configure an outbound interface for a IPv6 static route.

          Priority

          Set the priority of a IPv6 static route. A smaller value indicates a higher priority.

          Description

          Set the description information of a IPv6 static route.

          NOTE:
          • When both the destination IPv6 address and subnet prefix length are ::, the configured route is the default route.
          • If the outbound interface is not a point-to-point interface, the next hop address must be specified.

  2. Delete static routes.
    1. In IPv4 Static Route Configuration Table or IPv6 Static Route Configuration Table, select the static route to be deleted and click Delete.
    2. Click OK in the Information dialog box that is displayed.
Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 36054

Downloads: 100

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next