No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The Web System Page Is Not Completely Displayed After Successful Device Login Through the Web System

The Web System Page Is Not Completely Displayed After Successful Device Login Through the Web System

Symptom

After successful device login through the web system, the web system page is not completely displayed, or only several options are displayed.

Procedure

  1. Check whether the web user level is too low.

    If the user level is 1, the user is a common administrator and can only access Device Information and change the password in User Management. If the user level is 2, the user is an enterprise administrator and has most operating rights in the web system. If the user level is 3 to 15, the user is a super administrator and has all operating rights in the web system.

    Run the display this command in the AAA view to check the web user level. If the value of level is too small in the local-user user-name privilege level level configuration, some functions cannot be displayed in the web system. Run the local-user user-name privilege level level command in the AAA view to set the web user level to 3 or higher so that the web user has all operating rights in the web system.

  2. Check whether the device version is correct.

    Run the display version command in any view to check the device version. If the value of Version is too small in the VRP (R) software, Version Version configuration, the device does not support some functions in the web system. Upgrade the device to a proper version.

Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 33159

Downloads: 79

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next