No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Logs

Configuring Logs

Context

You can save logs in either of the following ways:
  • Configure the log buffer. A router reserves a certain size of flash memory to save a small number of logs.
  • Configure a log host to save logs.
NOTE:

The web platform supports 8 log hosts. When the number of configured log hosts exceeds that limited by the web platform, a dialog box is displayed indicating the number of log hosts reaches the maximum.

If the device does not support depth security or depth security is not enabled, some security logs cannot be displayed.

Procedure

  • Configuring log parameters
    1. Choose System Management > Log Management > Configure Logs.As shown in Figure 17-15.

      Figure 17-15  Configure Logs

    2. Set Information center to Enable in the Parameter Configuration area.
    3. Set Intrusion defense log to Enable in the Parameter Configuration area.
    4. Set URL filtering log to Enable in the Parameter Configuration area.
    5. Set Log buffer size(record).

      By default, the log buffer can store 512 logs.

    6. Click Apply.
  • Configuring a log host

    • Creating a log server

      1. Choose System Management > Log Management > Configure Logs.

      2. Click Create in the Log Host Configuration area.

      3. Enter the IP address of the log server in the Create A Log Host dialog box.

      4. Click OK.

        The created log host is displayed in the Log Host Configuration area. You can add a maximum of eight log hosts by repeating the preceding operations.

    • Deleting a log server

      1. Choose System Management > Log Management > Configure Logs.

      2. Select a log server or all log servers in the Log Host Configuration area.

      3. Click Delete.

      4. In the Information dialog box that is displayed, click OK.

        The log host is deleted.

Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 37933

Downloads: 103

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next