No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Trace Route

Trace Route


A trace route test tracks the forwarding path from a source device to a destination device. When a network failure occurs, you can use the tracert tool to locate the fault. You can specify a destination IP address or host name.

After the tracert operation is complete, the result is displayed in the Result text box.


  1. Choose System Management > Diagnostic Tools > Trace Route, as shown in Figure 17-32.

    Figure 17-32  Trace Route page

  2. In the IP/host name text box, enter the destination IP address or host name.
  3. Click Start.
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 38884

Downloads: 105

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next