No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring IP Traffic Statistics Collection

Configuring IP Traffic Statistics Collection

Context

This section describes how to configure IP traffic statistics collection on Layer 3 interfaces.

NOTE:
IP traffic statistics must be collected on LAN-side interfaces; otherwise, correctness of the statistics is affected.

Procedure

  • Querying IP traffic statistics on an interface
    1. Choose IP Service > IP Accounting > Configuration.
    2. Click Refresh.as shown in Figure 13-21.

      Figure 13-21  Configuring IP Traffic Statistics Collection page
      IP traffic statistics collection status on a Layer 3 interface is displayed in Configure Interface Statistics. For details about parameters in Configure Interface Statistics, see Table 13-26.
      Table 13-26  Parameter description

      Parameter

      Description

      Interface Name

      Interface's type and number.

      Traffic Statistics Status

      Statistics collection status. The value can be Collected or Non-collected.

      Interface IP Address

      Interface's IP address.

      Connection Status (Physical/Protocol)

      Status of physical and protocol connections. The value can be Up or Down.

  • Enabling the IP traffic statistics collection function on an interface
    1. Choose IP Service > IP Accounting > Configuration.
    2. Select an interface in Configure Interface Statistics.

      NOTE:
      You can select multiple interfaces to enable the function in batches.

    3. Click Enable.

      Statistics collection status of all selected interfaces is Collected.

  • Disabling the IP traffic statistics collection function on an interface
    1. Choose IP Service > IP Accounting > Configuration.
    2. Select an interface in Configure Interface Statistics.

      NOTE:
      You can select multiple interfaces to disable the function in batches.

    3. Click Disable.

      Statistics collection status of all selected interfaces is Non-collected.

Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 38402

Downloads: 103

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next