No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Device

Logging In to the Device

Context

You can use the device's factory settings to directly log in to the web system to manage and maintain the device.

Alternatively, you can configure the device's IP address, web system parameters, and a web system account, and then log in to the web system. For details about the configuration, see Web System Login Configuration.

As shown in Figure 5-1, you can log in to the device through the web system, and configure and manage the device on the PC.

Figure 5-1  Web system networking

Pre-configuration Tasks

Before logging in to the device through the web system, complete the following tasks:

  • Configure an IP address for the device's access interface.
    NOTE:

    The factory settings of the device include the IP address 192.168.1.1 and subnet mask 255.255.255.0. The access interface is the management interface under which the silkscreen Management or MGMT is printed. HTTP and HTTPS services are enabled on the device. For more details, seeWhich Interface Is Configured with the Default Management IP Address.

  • Use a network cable to connect the PC to the device.
    NOTE:

    If you cannot log in to the web using the PC that automatically acquires an IP address, configure a static IP address that is in the same network segment as the IP address of the device for the PC and then log in to the web.

  • The device is running properly.
  • Install the browser software on the PC.

Procedure

  1. Open the browser on the PC. Windows IE8.0 is used in this example. Enter https://192.168.1.1 in the address box and press Enter. The web system login page is displayed, as shown in Figure 5-2.

    Figure 5-2  Web system login page

  2. Enter login information.

    1. Select a language.

      The system supports English and Chinese. By default, the system uses the same language as the browser.

    2. Enter the user name and password.
      • The default user name for logging in to the web system is admin, and the default password is Admin@huawei.
      • The default user name for logging in to the voice self-service system is User Name of the configured voice user, and the default password is Admin@huawei.
    3. Click Login.

      The system displays a message about login failure in situations shown in Figure 5-3.

      Figure 5-3  Login failure

      Check the cause of the login failure based on the prompt message. If the number of incorrect password attempts reaches the upper limit, the current account will be locked. By default, a locked account is automatically unlocked after 5 minutes.

    NOTE:

    After a user logs in, the web system automatically displays the last login time, IP address, and login mode of the user.

  3. Change the login password.

    The system asks you to change the password in the following situations, as shown in Figure 5-4.

    • If the login password expires, the system forcibly requires you to change the password.
    • If you log in to the system for the first time after the password is changed by another user, the system forcibly requires you to change the password.
    • If you log in to the system within the password expiration notification period, the system notifies you of the password expiration time and advises you to change the password.
    Figure 5-4  Password change page

    NOTE:
    • If the parameters are marked with a red asterisk (*), the system forcibly requires you to change the password. After changing the password, click OK. If the password is changed successfully, the system displays the message "Your password has been modified successfully". Click OK. The login page is displayed. If you do not change the password, click Cancel. The login page is displayed and you cannot log in to the web system.
    • If the parameters are not marked with a red asterisk (*), the system asks you to change the password. After changing the password, click OK. If the password is changed successfully, the system displays the message "Your password has been modified successfully". Click OK. The login page is displayed. If you do not change the password, click Cancel. The Device Information page is displayed.

  4. Click Logout in the upper right corner of the page to return to the login page.
  5. If you do not perform any operations within a period (10 minutes by default) after logging in to the web system, the system automatically logs you out. Click OK to return to the login page.

(Optional) Basic Configuration After First Login

After logging in to the device through the web system for the first time, you can configure basic settings, such as configuring a web user and the device's IP address for remote login and management.

Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 31058

Downloads: 71

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next