No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing IP Traffic Statistics

Viewing IP Traffic Statistics

Context

This section describes how to view statistics about IP packets.

You can collect statistics about IP packets in the common method or based on the packet priority. The web management system supports only the common method to collect statistics about incoming and outgoing IP packets.

The web management system does not allow you to configure rules for collecting IP traffic statistics.

Procedure

  • Querying and ranking IP traffic statistics
    1. Choose IP Service > IP Accounting > Traffic Statistics, as shown in Figure 13-20.

      Figure 13-20  Viewing IP Traffic Statistics page

    2. Click Refresh.

      The current IP traffic statistics are displayed in Traffic Statistics Ranking. For details about parameters in Traffic Statistics Ranking, see Table 13-25.

      Table 13-25  Parameter description

      Parameter

      Description

      User Address

      User's IP address.

      Total Traffic (Packets)

      Total number of collected packets.

      Total Inbound Traffic

      Total number of collected incoming packets.

      Total Outbound Traffic

      Total number of collected outgoing packets.

      Inbound TCP Packet Quantity

      Total number of collected incoming TCP packets.

      Outbound TCP Packet Quantity

      Total number of collected outgoing TCP packets.

      Inbound UDP Packet Quantity

      Total number of collected incoming UDP packets.

      Outbound UDP Packet Quantity

      Total number of collected outgoing UDP packets.

      Inbound ICMP Packet Quantity

      Total number of collected incoming ICMP packets.

      Outbound ICMP Packet Quantity

      Total number of collected outgoing ICMP packets.

    3. Click Total Traffic (Packets) on the top of the list, and rank the traffic statistics in ascending or descending order.
  • Querying IP traffic statistics based on the IP address
    1. Choose IP Service > IP Accounting > Traffic Statistics.
    2. Enter an IP address and click Search.

      Statistics about traffic on the specified IP address are displayed. For details about parameters, see Table 13-25.

  • Deleting IP traffic statistics
    1. Choose IP Service > IP Accounting > Traffic Statistics.
    2. Click Clear. Current IP traffic statistics are deleted, and traffic statistics are collected again.
Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 35711

Downloads: 92

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next