No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Web-based Configuration Guide

AR650, AR1600, and AR6100 V300R003

This document describes how to configure and maintain your routers using the web platform.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QoS Configuration Wizard

QoS Configuration Wizard

Procedure

  1. Configure rate limit on the WAN-side interface.

    1. Choose Configuration Wizard > QoS Configuration Wizard.
      Figure 10-14  QoS Configuration wizard page

    2. Configure rate limit on the WAN-side interface, and select or set parameters according to Table 10-13.
      Table 10-13  Description of parameters for rate limit on the WAN-side interface

      Item

      Description

      Interface Name

      Indicates the interface to which the traffic policy is applied.

      Direction

      Indicates the direction to which the traffic policy is applied.
      NOTE:
      This parameter cannot be modified. OutBound indicates the outbound direction to which the traffic policy is applied on an interface. Here, the reference bandwidth for service scheduling is configured in the outbound direction. Inbound rate limit is often configured on the upstream device, which is seldom used. Inbound rate limiting is not implemented currently.

      Bandwidth (Kbps)

      Specifies the available bandwidth of an interface, in kbit/s. The parameter is optional and used to shape traffic on the interface and limit the rate of outgoing packets.

    3. Click Next.

  2. Configure service bandwidth of WAN interface.

    1. Configure the bandwidth based on DSCP priorities. You can also use default values. The bandwidth cannot be empty and the sum of the bandwidth cannot exceed 99% of the rate limit. At least 1% of the bandwidth is allocated to the default flow queue.

    2. Click Next.

  3. Confirm the configurations.

    1. Check detailed QoS configurations.

    2. Click Finish.

Download
Updated: 2019-04-12

Document ID: EDOC1100041803

Views: 31117

Downloads: 71

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next