No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionCloud 6.3.1 Management Plane Hybrid Cloud Guide 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic Information About Resource Pools

Configuring Basic Information About Resource Pools

Operation administrators can configure the address for logging in to ECSs using VNC.


  • You have obtained the username and password of an operation administrator.
  • Resource pools have been connected to ManageOne.


  1. Use a browser to log in to the ManageOne operation plane as an operation administrator.

    In the non-B2B scenario, the login address format is https://Address for accessing the Console page, for example,

    In the B2B scenario, the login address format is https://Address used by operation administrators to access the ManageOne operation plane, for example,

  2. Choose System > Cloud Resource Pool Access from the main menu.
  3. In the navigation pane, choose HUAWEI CLOUD Access.
  4. Click the name of a target HUAWEI CLOUD account.
  5. On the displayed Region List page, locate the row that contains the target resource pool, and click Configure.
  6. In the displayed Configure Resource Pool dialog box, set parameters as described in Table 2-2.

    Table 2-2 Configuration parameter descriptions


    Parameter Description

    Example Value

    Cloud Resource Pool Name

    Indicates the name of a resource pool, which is the same as the resource pool name displayed in the resource pool list. You do not need to set this parameter.


    ECS VNC Domain Name

    Indicates the domain name for logging in to the ECS using VNC.

    ECS VNC Port

    Indicates the port number for logging in to the ECS using VNC. The value is an integer ranging from 1 to 65535.


    This parameter is not displayed on the WebUI of ManageOne 6.3.2 or later.


  7. Click OK.


    After a resource pool is configured, you can click the resource pool name, and view configuration information about the resource pool on the Configuration tab page.

Updated: 2019-01-17

Document ID: EDOC1100043116

Views: 32520

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next